Free shipping on $35+ Use code: FREESHIP

Collection: Learn Easy Way to make DIY string art kit!!

GOOD VIBES - GOOD LIGHT

String art is a colorful DIY bedroom decoration project that will glow up your child's bedroom. String art is using different colored strings to weave and wind patterns on top of shape forms. The multiple layers of strings create bright patterns that are the perfect accent for kid's bedroom walls.

 

THE DIY STRING ART KIT COMES WITH:

  • 250 PUSH PINS
  • 1 PEACE SIGN FOAM BOARD
  • 1 BUTTERFLY FOAM BOARD
  • 1 LIGHTNING BOLT FOAM BOARD
  • 8 BUNDLES OF EMBROIDERY FLOSS: 1 Bundle Dark Yellow, 1 Bundle Bright Yellow, 3 Purple Ombré Bundles,
  • 3 Pastel Rainbow Bundles
  • 1 LED LIGHT STRING
  • 1 HOOP-AND-LOOP FASTENER

PLACE THE PINS
Push one pin into each white dot on the foam cut out. For the best results, follow the guided dots.
You only need to push them in about halfway to secure the pin. Don’t push them through the back of the foam.

STRING IT
Once you have placed all the pins, you are ready to start stringing your foam boards!

LET’S GET STARTED!

BUTTERFLY

Purple Ombré Embroidery Floss


Step 1. Tie a knot around one of the pins on wing 1 and pull tight to secure
Step 2. Create an outline around wing 1. Every once in a while, wrap the floss around a pin to secure it.

Step 3. Fill in the middle of the shape by zig-zagging the string in all different directions.
Step 4. Once your wing is filled, tie a knot around any of the pins around wing 1 and cut the excess string off.
Step 5. Repeat all steps for wing 2.

 

PEACE SIGN

Pastel Rainbow Embroidery Floss

Step 1. Tie a knot around one of the pins on finger 1 and pull tight to secure.
Step 2. Take the embroidery floss and completely outline the pins surrounding fingers 1 and 2.
Step 3. Fill in the middle of the shape by zig-zagging the floss across fingers 1 and 2.

Step 4. Tie a knot around any of the pins on fingers 1 or 2 and cut he excess string.
Step 5. Repeat steps for sections 3-5.

LIGHTNING BOLT

Dark Yellow Embroidery Floss, Bright Yellow Embroidery Floss, LED String Lights, Hoop-And-Loop Fastener

Step 1. Start by wrapping the end of the string lights around one of the bottom pins. Going from the bottom of the lightning bolt to the top, zig-zag the lights around the pins.
Step 2. Take the bright yellow embroidery floss and tie a knot around any pin. Pull tight to secure.
Step 3. Create an outline around the entire lightning bolt. Go back and forth as many times as you want.
Step 4. Fill in the middle of the shape by zig-zagging the string across the lightning bolt.

Step 5. Tie a knot around any of the pins and cut the excess string.
Step 6. Grab the dark yellow embroidery floss. Tie a knot around the bottom pin. Pull tight to secure.
Step 7. Outline the pins along the left side. Go back and forth as many times as you want.

Step 8. Tie a knot around any of the pins on the left and cut the excess string.
Step 9. Attach hoop-and-loop fastener to the back of the foam and the back of the battery pack. Attach together.

DECORATE YOUR BEDROOM!!



Interested in more DIY how to’s? Follow us on Facebook, Instagram or visit our blog for more inspiration.

Leave a comment

Please note, comments must be approved before they are published